Working with the notebook
Manual removal (emergency removal)
CD/DVD:Manualremovalofdatacarrie rEmergency r emovalofda tacarrier
In the event of a power failure or damage to the drive, y ou can remove the data carrier manually.
1
2
► Switch your notebook off.
► Push a pen o r a piece of wire (such as a
paperclip) fi rmly into the opening (1).
The drive tray is ejecte d. You c an now pull
the drive tray (2) out of the drive.
Removing and fitting the dust removal cover
(ventilation slot cover)
The description below app lies to b oth vent covers.
In order to ensure optimum cooling of the components in y our notebook, you
should periodically clean the v entilation slot of the heatsink.
This ensures optimum fan performance. You can achieve the best cleaning
results with a small hand-held vacuum cleaner.
If necessary, you can also use a dry brush to release d ust from the ventilation slots.
Do not use a ny cleaning liquids! Ensure that no liquid enters the device.
To avoid overheating of the device , do not remove the ventilation slot
cover when the device is switched on.
► Prepare fo
r r emoval, see chapter "
Prep aring to remove components", Page 65.
34 Fujitsu Tech nology Solutions
To Next Page
Loading...
