Working with the notebook
Setting up WLAN access
• Requirement: A WLAN must be available and you mu st have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
Access via UMTS / LTE
If you ordered a n integrated UMTS / LTE module with your system , you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. The
optional UMTS / LTE modu le is ready for use straight away.
If you did not order a UMTS / LT E module, you can purchase the accessories for UMTS /
LTE reception from your retailer o r your Fujitsu Technology Solutions dealer.
You will find information on establishing the connection with the UMTS / LTE netw ork
in the documentation for the hardware used.
Your device can co nnect to the Internet via UMTS / LTE. To do th is, use one
of the following types of connection:
• Integrated UMTS / LTE module (availability depend ent on your model variant)
• a U SB dongle (a USB stick with your mobile phone provider ’s SIM card)
• UMTS / LTE ExpressCard ( fits into the ExpressCar d slot on your device)
• a mobile end-device (e.g. mobile phone w ith Bluetooth or cable connection)
Ethernet and LAN
EthernetLAN
The internal network module of your notebook supports Ethernet LAN . You can use it to
establish a connection to a local network (LAN = Local Area Network).
2
1
► Connect the network cable to the LAN
port of the notebook (1).
► Connect the network cable to your
network co nnection (2).
Your n
etwork administrator can help you to config ure and use the LAN co nnection s.
The n
etwork cable is not included in the delivery scope. This type of
cabl
e can be obtained from a specialist dealer.
44 Fujitsu Tech nology Solutions
To Next Page
Loading...
