Troubleshooting and tips
Cause Troubleshooting
Wrong monitor has been set under
Windows 2000
► Restart the device.
► If the message
Starting Windows appears, press
function key
F8
The Windows 2000 Advanced Options Menu appears.
► Select
Safe Mode or Safe Mode with Network.
► Set the correct values for the attached monitor as
described in the operating manual of the monitor by
selecting Start - Settings - Control Panel - Display -
Settings.
Wrong monitor has been set under
Window XP
► Restart the device.
► Press
F8 while the system is booting.
Either the Windows Advanced Start Options menu or the
menu for selecting the operating system appears.
► If the menu for selecting the operating system
appears, press
F8 .
► Select Safe Mode or Safe Mode with Network.
► Set the correct values for the connected monitor as
described in the operating manual of the monitor by
selecting Start - Settings - Control Panel - Display and
then the Appearance, Themes, Settings tabs.
Wrong monitor has been set under
Window 7
► Restart the device.
► Press
F8 while the system is booting.
Either the Windows Advanced Start Options menu or the
menu for selecting the operating system appears.
► If the menu for selecting the operating system
appears, press
F8 .
► Select Safe Mode or Safe Mode with Network.
► Select Start - Control Panel - Appearance and Themes -
Display
to set the correct values for the connected
monitor, as explained in the monitor instructions.
The wrong RAM memory modules
have been inserted.
► See the manual for the mainboard for information on
which memory modules can be used.
26 Fujitsu Technology Solutions
To Next Page
Loading...
