Getting started
► Plug the data cable into a suitable monitor port of the device (VGA, DVI-D, Displayport, HD MI).
On devices with monitor socket:
The monitor power cable may only be connected to the monitor s ocket o f the device
if the monitor current consumption is less than 1.0 A at 230 V or 2.0 A at 100
V. The values for the monitor current consumption can be found in the technical
data on the monitor or in the operating m a nual for the monitor.
2
1
► Depend ing on your device configura tion level, plug the monitor power cable into either
the monitor socket of the device (1) or a gro unded power outlet (2).
When you connect the monitor to the monitor socket of the device, it automatically
switches off as soon as the device switches off.
Fujitsu 19
To Next Page
Loading...
