Fujitsu CELSIUS R920 - User Manual

Other manuals for Fujitsu CELSIUS R920

Questions and Answers

C
Christy PinedaAug 11, 2025
What to do if the Fujitsu CELSIUS R920 Desktop monitor remains blank?
- A
  Andrew ArnoldAug 11, 2025
  If your Fujitsu Desktop monitor remains blank, first, ensure the monitor is switched on. If it is on, check if power saving mode is activated by pressing any key or deactivating the screen saver. Also, verify the brightness control isn't set too low. Ensure the monitor and device power cables are properly connected to both the devices and grounded mains outlets. Finally, confirm the monitor cable is securely connected to both the device and the monitor.
R
Randall LeeAug 17, 2025
How to fix a Fujitsu Desktop that won't switch off?
- Q
  qmurrayAug 17, 2025
  If your Fujitsu Desktop won't switch off using the ON/OFF switch, try pressing the switch again. If that doesn't work and the system has crashed, keep the power button pressed for at least 4 seconds to force a shutdown. Be aware that forcing a shutdown can lead to data loss, and error messages may appear the next time the system is started.
E
Emily TaylorAug 25, 2025
Why is my Fujitsu CELSIUS R920 Desktop power-on indicator unlit?
- L
  Lauren WileyAug 25, 2025
  If the power-on indicator on your Fujitsu Desktop is unlit after switching it on, it could be due to a faulty mains voltage supply. Check whether the power cable is properly plugged into both the device and a grounded mains outlet, and ensure the device is switched on. Another cause might be an overloaded internal power supply. To resolve this, pull the power plug out of the mains outlet, wait a moment, then plug it back into a properly grounded outlet and try switching the device on again.
H
Heather SanchezAug 29, 2025
How to get mouse pointer back on Fujitsu Desktop?
- M
  Margaret ArmstrongAug 29, 2025
  If there is no mouse pointer displayed on the screen of your Fujitsu Desktop, shut down your operating system properly. Then, switch the device off and check that the mouse cable is properly connected to the system unit, including any adapters or extension leads. Ensure only one mouse is connected before switching the device back on.
G
Gregory VasquezSep 4, 2025
How to correct the time and date on a Fujitsu Desktop?
- C
  Christopher MclaughlinSep 4, 2025
  If the time and/or date is not correct on your Fujitsu Desktop, set the correct time and date within the operating system you are using, or set the correct time and/or date in the BIOS Setup. If the time and date are repeatedly wrong when you switch on your device, the lithium battery may be discharged. In this case, replace the lithium battery.