System expansions
Removing a board
► Open the casing (see "Opening the casin g", Page 33).
Board
► D isconnect the cables connected to the bo ard.
2
1
2
► U ndo the screw (1
).
► Pull the board and the adapter card out of the slot i n the direction of th e arrow (2).
► Place the board
in suitable packaging.
► C lose the casing (see "
Closing the casing", Page 34).
Installing and removing heat sinks
Removing the heat sink
The shape and po sition of the heat sink are device-dependent.
► Open the casing (see "
Opening the casing", Pa ge 33).
► Remove the hood.
► U ndo the screws on the heat sink.
► Lift the heat sink out of the casing.
You can now replace the processor.
70 Fujitsu Technology Solutions
To Next Page
Loading...
