System expansions
Replacing the lithium battery
In order to permanently save the system information, a lithium battery is installed to provide
the CMOS-memory with a current. A corresponding error message notifies the user when the
charge is too low o r the battery is empty. T he lithium battery must then be replaced.
Incorrect replacement of the lithium battery may lead to a risk of explosion!
The lithium battery may be replaced only with an identical battery or with
a type recommended by th e manufacturer.
Do not dispose of lithium batteries with household waste. They must be disposed
of in accordance with local regulations concern ing special waste.
Ensure that you observe the correct polarity when replacing th e lithium battery!
Lithiumbattery,Replacing,Re placing,Replacing,lithiumbatteryBattery
The lithium battery holder exists in different designs that function in the same way.
1
2
3
1
2
3
► Press the catch in the direction of the arrow (1).
The battery jumps out of the holder slightly.
► Remove the battery (2).
► Push the new lithium battery of the identical type into the holder (3) an d
press it down until it e ngages.
72 Fujitsu Technology Solutions
To Next Page
Loading...
