Fujitsu CELSIUS R920 - No Mouse Pointer Displayed on the Screen

Troublesho oting and tips
Cause
Remedy
Wrong monitor has bee n s et under Window XP ► R estart the device.
► Press
F8
while the system is booting .
Either the Windows Advanced Start Options menu
or the men u for selecting th e operating system
appears.
► If the menu for selecting the ope rating
system appears, press
F8
.
► SelectSafe Mode or Safe Mode with Network.
► Go to Start – Settings – Control Panel – Display
and the tabs Appearance, Themes, Settings
to set the correct values for the connected
monitor as described in the operating
manual o f the monitor.
Wrong monitor ha s been set under Windows 7 ► R estart the device.
► Press
F8
while the system is booting .
Either the Windows Advanced Start Options menu
or the men u for selecting th e operating system
appears.
► If the menu for selecting the ope rating
system appears, press the
F8
key.
► Select Safe Mode or Safe Mode with Network.
► Go to Start – Control Panel – Appearance
and Personalization – Display to enter the
correct values for the connected monitor as
described in the operating m anual of the
monitor.
No mouse pointer displayed on the screen
Cause
Remedy
The mouse is not correctly connected.
► Shut down your operating system in the
proper manner, for instance using
Ctrl
+
Alt
+
Del
.
► Switch the de vice off.
► C heck that the mouse cable is properly
connected to the syste m unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
► M ake sure that only one mouse is
connected.
► Switch the device on.
Fujitsu Technology Solutions 29