EasyManua.ls Logo

Fujitsu CELSIUS R920 - Connecting External Devices to the USB Ports; Switching on for the First Time: Installing the Software

Fujitsu CELSIUS R920
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting s tarted
Connecting external devices to the USB ports
USBdevices,USBport,Externaldevices,Devices,
You can connect a wide range of external devices to the U SB ports (e.g.
printer, scann er, modem or keyb oard).
USB devices are hot-pluggable. Th is means you can connect and disconnect
USB cables while your device is switche d on.
Additional information can be found in the documentation for the USB devices.
Connect the data cable to the external device.
C onnect the data cable to one of the USB ports on your device.
Device drivers
The external USB devices you connect to the USB po rts usua lly require no
driver of their own, as the required s oftware is alrea dy included in the operating
system. Howe ver, if the external USB device requires its own softw are, please
install it from the data carrier provided with the USB device.
To ensure the transmission capacity of USB 2.0, the cable from the external USB
device to the USB port of your device must not be longer than 3 m.
The USB port for USB 3.0 is located on the front of your device.
Switching on for the rst time: installing the software
Installing,Software,Installing,
Once the installation has been started the device must not be switched
off, unless th e installation h as been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not b e carried out correctly and the contents
of the hard disk must be completely restored.
If the devic
e is i ntegrated into a network, the user and server details as well as
the network
protocol are required during the software installation.
Contact yo
ur netw ork administrator if you have any questions about these settings.
When you sw
itch on the device fo r the rst time, the supplied software
is instal
led and congured. Plan a reasonable amoun t of time for this,
as this pr
ocess must not be interrupted.
You may n
eed the licence number for Windows during the installation. The licence
number i
s locate d on a sticker on your device.
18 Fujitsu Technology Solutions

Table of Contents

Other manuals for Fujitsu CELSIUS R920

Related product manuals