Fujitsu CELSIUS R920 - Installing and Removing the Accessible 5; Inch Drive; Fitting the Drive Cover for the 5 Inch Drive

System expan sio ns
Installing and removing the accessible 5
1
/
4
inch drive
Fitting the drive c over for th
e5
1
/
4
inch driv e
• Requirement: The casing is open (see section "Opening the casing", Page 33).
To use the latch function of
theaccessible5
1
/
4
inch drive, you must fit the corresponding
drive cover before install
ing the drive in th e casing. Proceed as follows:
2
3
1
► Unlock the drive cover (1).
► Push the drive metal plate upwards (2) s o it is released from the catches with which it is secured.
► Lift the drive cover away from the casing (3).
1
► Put the drive metal plate onto the
left-hand side of the drive (1).
Fujitsu Technology Solutions 35