System expan sio ns
Removing the protective grille
1
► Pull the protective grille away from the casing (1).
Ifyouuseacasingwithacasinglock,theprotectivegrilleinfrontofthe
drives is also protected against unauthorised opening.
In this event, open the casing and remove the side cover (see
"
Opening the casing", Page 33).
Installin g
aharddiskdrive
• Requirement: r emove the protective grille (see "Removing the protective grille", Pa ge 55).
EasyChange rails for a second hard disk drive are mounted on the drive cage.
Fujitsu Technology Solutions 55