Getting s tarted
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not co nnect or disconnect cables during a thunderstorm.
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.
Connect and disconnect the cables in the order described below.
Connecting the cables
► Turn off all power and equipment switches.
CordCable,
► R emove all power plugs from th e grounded mains outlets.
► C onnect all the cables to th e device and the external d evices. Please make sure that you
always observe the safety notes provided in "
Important notes", Page 9.
► Plug all data communication cables into the appropriate sockets.
► Plug all p ower cables into the grounded mains outlets.
USB devices are hot-pluggable. Th is means you can connect and disconnect
USB cables while your device is switche d on.
Additional information can be found in "
Connecting external devices to the USB
ports", Pa ge 18 and in the documentation for th e USB devices.
Disconnecting the cables
► Switch off al
l affected devices.
Cable,
► R emove all power plugs from th e grounded mains outlets.
► Unplug all d
ata communication cables from the a pprop riate sockets.
► D isconnect all o f the cables from the device and from the external devices.
14 Fujitsu Technology Solutions
To Next Page
Loading...
