System expan sio ns
Screwing the reader onto the module holder
2
2
a
a
1
► With the component side facing downw ards,
slide t he reader in the d irection of arrow (1)
into the guide on the module holder (a).
► Fa sten the reader with th e screws (2).
Installing a module holder with reader
1
2
2
► Push the module holder into the casing in the direction of the arrow (1).
► Fasten the m odule holder with the screws (2).
► Connect the cables to the boards and the mainboard. Make sure the polarity is correct.
► Close the casing (see "
Closing the casing", Page 34).
The fan for the processor and the card holder must be removed so
that the data cab les can be routed.
Fujitsu Technology Solutions 39
To Next Page
Loading...
