Getting started
Settingupthedevice
Workstati onErgonomicDevice
When installing your device, please read the reco mmendations and safety
notes in the "Safety/regulations" manual.
We recommend that you place your device on a surface which is not slippery. In
view of the many different finishes and varnishes used on furniture, it is p ossible
that the rubb er feet will mark the surface they stand on.
Depending on the location of your device, troublesom e vibrations and noises
may occur. To prevent this, a distance of at least 10 mm should be m aintained
from other devices on casing sides without ventilation su rfaces.
In order to avoid overheating, do not cover the ve ntilation areas
of the monitor or the device.
A minimum distance of 200 mm from the device m ust be ob served for ven tilation areas.
Do not stack seve ral devices on top of each other.
Do not expose the device to extreme ambient conditions (see "
Technical data", Page 73,
section "Ambient conditions"). Protect the d evice against dust, h umidity and heat.
Connecting the machine to the mains
Mainsadapt er,
2
1
► Connect the mains cable to the machine (1).
► Plug th
e mains plug into a three-pin socket (2).
Fujitsu Technology Solutions 13
To Next Page
Loading...
