EasyManua.ls Logo

Fujitsu D1451 - System Configuration: Switches and Jumpers; Switch Functions Explained

Fujitsu D1451
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pin assignment of internal ports
14 - English A26361-D1451-Z120-1-6319
Settings with switches and jumpers
The positions of the switches and jumpers are shown on page "Cover".
Skipping system and BIOS Setup password - switch 1
Switch 1 enables skipping the system and BIOS Setup password.
On System and BIOS Setup password are skipped when the device is switched on and
may be changed.
Off System and BIOS Setup password must be entered when the device is switched on.
Recovering System BIOS - switch 2
Switch 2 enables recovery of the old system BIOS after an attempt to update has failed. To restore
the old system BIOS you need a Flash BIOS Diskette (please call our customer service centre).
On The System BIOS executes from floppy drive A: and the inserted "Flash-BIOS-
Diskette" restores the System BIOS on the mainboard.
Off Normal operation (default setting).
Reserved - switch 3 and switch 4
Switch 3 and 4 are reserved.

Related product manuals