Fujitsu D2619 - 3.1 Overview: Graphic, LAN, Storage

14 Technical Manual D2619 (RX/TX300 S5)
Overview Features
– SMSC8700 Fast Ethernet
– ADT7462 temperature/system monitoring controller
Graphic
– integrated VGA controller with PCIe x1 interface (Matrox G200)
– 8 MB graphic memory available via driver
– VESA compatible
LAN – Ethernet controller
– 1x Intel
®
82575EB dual-port 10/100/1000 MBit/s Base-T Ethernet controller
– PXE 2.0 and iSCSI boot support
– IPV6 header offloading
Storage devices
– 2x SATA2 (3 Gbit/s)
– 2x USB 2.0 (internal USB backup drives and USB FDD)
– 1x internal USB2.0 memory stick
External connectors
– 2x serial interfaces (COM)
– 4x USB 2.0 interfaces with 480 Mbit/s at the rear side
–1x VGA
– 2x RJ45 LAN
– 1x RJ45 service LAN
Internal connectors
–2x serial ATA
– 1x operating panel
– 1x VGA port at the front side
– 1x universal USB port
– 1x USB port for 3 USB ports at the front side
– 2x USB ports for USB tape drives
– 1x intrusion detection (only in TX300 S5)
– 7x PCI Express slots
– 18x slots for DDR3 memory modules
– 1x HDD activity LED
– 1x power supply (12 V and 5 V auxiliary supply)
– 1x combined connector for HDD power supply and fan