Brief description of mainboard Engl
ish - 3
Brief description of m ainboar
d
Information about boards
Be sure to observe the following for bo ards with ESD:
• You must always discharge static build up (e .g. by touching a groun ded object)
before working with the board.
• The equipment and tools you use must be free of static charge.
• Remove the power plug from th e mains supply before inserting or removing
boards.
• Always hold boards by their e dges.
• Never touch connector pins or conductors on the board.
An overview of the features is provided in the data sheet.
Special features
Your mainboard is available in different confi guration levels. Depending on the configuration,
your mainboard w ill be equipped with or provide suppo rt for certain features.
This manual describes the m o st important properties of this mainboard.
Additional information on mainboards is provided in the manual "Basic information on mainboard"
on the "User Do cume ntation" or "OEM Mainboard" CD, or on th e Inte rnet.
Fujitsu Technology Solutions 19
To Next Page
Loading...
Need help?
General
