Fujitsu D3003 - Page 7

Internal connectors and slots
List of onboard Features D3003-A D3003-B
Internal Con nectors
DIMM Sockests (DDR3 1066/1333, SO -DIMM)
21
PCI E xpress x16 Slot
--
PCI Expre ss x1 Slot
proprietary x2
-
PCI Slot (32 bit, 33 MH z, Rev. 2.3)
1
-
Speaker
Specific socket for inte
rnal USB Stick
--
Serial (FIFO, 16550 compatible)
--
Intrusion (Case Open) onboard switch
-
Feature Connector (G
eneral Purpose I/O)
--
USB ( 2.0, ~480 Mbit/s, 2 channels p er connector)
21
Frontpanel (Power Switch, LEDs, Intel 10 pin he ader)
--
Dual channel LVD
S / Backlight Control
-/- -/-
Onboard Power Output (+5 V / 2 A, +12 V / 2 A) for drives
-
Onboard (internal input) DC-IN 19-24 V / 3 A
--
Power o ver Eth
ernet module (PoE) DC-IN 15 V (optional)
External Conne ctors
Audio In / Line Out (or driver configuration) / Microphone In 1 / 2 / 1 1 / 2 / 1
PS/2 Mouse
/ Keyboard
/ /
USB (2.0, ~480 Mbit/s)
66
Serial (RS232, FIFO, 16550 compatible) 2 1
DC-IN (e
xternal inpu t) 19 V / 2 A (dependent on system
compone
nts 20 V / 3.25 power supply necessary)
DC-IN (external input) 19-24 V / 3.25 A
--
1) Maximum supported Transfer Rate per Port
2) Not supported by standard Power Supplies
Power
Supply Requirements - for onboard componen ts (worst case)
Source Volt
age
Maxi
mal variation
Main
board current
typ
ical
D3003-A/B
Main Power Supply 19
V
+/-10 % 1 A
Fujitsu Technology Solutions