Need help?Do you have a question about the Fujitsu D3071-S and is the answer not in the manual?
General| Socket Type | LGA 1155 |
|---|---|
| Memory Slots | 4 x DIMM |
| Max Memory | 32 GB |
| PCIe x16 Slots | 1 |
| PCIe x1 Slots | 2 |
| PCI Slots | 1 |
| LAN | Intel 82579LM Gigabit Ethernet |
| RAID Support | RAID 0, 1, 5, 10 |
| Serial Ports | 1 |
| Parallel Port | 1 |
| Storage Interface | SATA 3.0, SATA 2.0 |
| SATA | 2 x SATA 3.0, 4 x SATA 2.0 |
| Video Outputs | 1x DVI-D |
| PS/2 Ports | 2 |
| Supported Memory Types | DDR3 1333/1066 MHz non-ECC, unbuffered memory |
Safety instructions for connecting/disconnecting cables and modules to the mainboard.
Details on internal USB stick and flash drive connectors.
Information on the 8-bit GPIO port and hardware watchdog functionality.
Diagrams illustrating the mainboard's basic layout and block architecture.
Details of external connectors available on the D3071-S mainboard.
Details of external connectors available on the D3076-S mainboard.
Identification of onboard components on the D3076-S mainboard.
Identification of onboard components on the D3071-S mainboard.
Description of the I/O shield for steadiness and EMI/ESD protection.
Pinout and signal descriptions for the front panel connector.
Pinouts for internal parallel port and COM2 connectors.
Pinouts for internal USB, USB flash drive, and USB stick connectors.
Details on fan connectors and the main power supply interface.
Pinouts for HD Audio and AC97 front panel audio connectors.
Pinouts for the main 24-pin ATX and additional power supply connectors.
Pinout and operational parameters for the GPIO connector.
Configuration and function of the chassis intrusion detection connector.
Details on temperature sensors and fan connectors on the mainboard.
Using SystemGuard for monitoring temperatures and fan speeds.
Detailed explanation of SystemGuard's sensor and fan matrix.
Customizing system monitoring settings with SilentFanConfigManager.
Components designed for continuous operation at 60°C.
Comparison of capacitor endurance times under different conditions.
Thermal imaging results of the D307x-S mainboard.
Reference points and temperature limits for mainboard components.
Requirements and connectors for ATX power supply.
Information on using the VGA output for display.
Information on using the DVI output for display.
Information on using the HDMI output for display.
Information on using the DisplayPort output for display.
Configuration for dual DVI monitor setup.
Details on achieving multi-monitor output.
Support and driver availability for Windows XP and Windows 7.
Status of Linux distributions compatibility with the mainboard.
Overview of common tools for mainboard management and customization.
Tools for customizing boot logo and BIOS settings.
Tool for OEM specific data, serial number, and TPM settings.
Using SystemGuard for monitoring temperatures and fan speed.
Tools for industrial system management, including fan control and monitoring APIs.
Adjustments for installing Windows XP in AHCI mode.
Installing RAID/AHCI drivers for Windows XP from floppy disk.
Details on the system watchdog for BIOS, OS boot, and runtime supervision.
Procedures for updating BIOS and recovering from BIOS corruption.
To Next Page
