Need help?Do you have a question about the Fujitsu D3488 and is the answer not in the manual?
General| Socket Type | LGA 1151 |
|---|---|
| Memory Type | DDR4 |
| Max Memory Supported | 64 GB |
| SATA Ports | 6 x SATA 6Gb/s |
| Memory Slots | 4 |
| PCI Express Slots | 1 x PCIe 3.0 x16 |
| USB Ports | 4 x USB 2.0 |
| M.2 Slots | 1 x M.2 |
| Graphics Output | 1 x DVI-D, 1 x DisplayPort |
| LAN | Intel I219-LM Gigabit LAN |
| Expansion Slots | 1 x PCIe 3.0 x16 |
| Storage Interfaces | 6 x SATA 6Gb/s 1 x M.2 Socket 3 |
| BIOS | AMI BIOS |
Product description information corresponds to design requirements and is provided for comparison.
Lists registered trademarks of Fujitsu, Intel, and Microsoft, and other companies.
Prohibits copying, reproduction, or translation without prior written consent from Fujitsu.
Observe safety notes, risks of explosion from battery, and hot components danger.
Warranty invalidated if system is damaged during installation or expansion replacement.
Handle boards with care to prevent damage to components and conductors.
Discharge static build-up, use anti-static equipment, and handle boards by edges.
Details CPU socket type, processor support, and integrated memory controller.
Specifies DDR4 memory architecture, slots, and supported speeds.
Lists key chipsets like Intel C624, Realtek Audio, and Intel LAN controllers.
Details audio capabilities including line-in, line-out, and headphone jacks.
Covers LAN features like WakeOnLAN, PXE, and Jumbo-Frames.
Specifies the number of serial ATA ports available.
Lists BIOS features such as passwords, recovery support, and virus protection.
Details security features like Trusted Platform Module 2.0 and USB dynamic security.
Covers features like Wake on LAN, USB voltage, and fan control.
Includes Fujitsu solutions for system and thermal management.
Details ACPI power management features like Save to RAM/Disk.
Overview of basic security features, referring to BIOS Specification for details.
Explains TPM as a TCG security solution for enhancing system security.
Guidelines for selecting and installing CPUs, including single/dual processor systems.
Details DDR4 memory technology, speeds, and connector specifications.
Details the 12V power connectors and their pin assignments.
Description of 4-pin fan connectors for tachometer monitoring.
Details the pinout for the internal chassis intrusion connector.
Details the pinout for the PC2009 PSU connector.
Details the pinout for external USB 2.0 ports.
Details the pinout for internal USB 2.0 ports.
Details the pinout for the internal SCSI LED connector.
Key points and compatibility for installing memory modules.
Details supported Intel Xeon CPUs, socket type, and power limits.
Warning about touching processor underside and potential soiling damage.
Instructions for removing the processor base cover when upgrading.
Steps for releasing the processor frame from locking slots.
Instructions on placing the processor on a non-conductive surface.
Ensure processor model number matches requirements for dual-processor systems.
Instructions on applying paste, quantities, and pre-applied paste.
Instructions for removing protective caps from the heat sink.
Guidance on positioning the processor on the heat sink for correct assembly.
Check add-in card compatibility with the motherboard before installation.
Install cards firmly, avoid forcing, and stagger placement for airflow.
Diagram and description of ATX port stack and external connections.
Explanation of the LED indicators on the LAN RJ45 connector.
Caution regarding careful insertion of connectors into ports to prevent damage.
Purpose of CMOS battery and requirements for replacement.
Safety warnings, correct insertion, and proper disposal of lithium batteries.
Reasons for performing a BIOS update, including compatibility and problem-solving.
Procedure for updating BIOS using Windows with the DeskFlash utility.
To Next Page
