Installing/removin g m ain memory En
glish - 5
Installing/removing main mem
ory
Tech nic al data
Technology
DDR3 1333 / 1,600 MHz unbuffered SO -DIMM modules 204 p in; 1.5 V;
64 bit, no ECC
Tota l size
1to16GByteDDR3
Module size
1, 2, 4 or 8 GByte for one module
A curren t list of the memory modules re commended for this mainboard is ava ilable
on the Internet at: "
http://ts.fujitsu.com/mainb oards".
At least one memory module mu st be installed. Memory m odules with different
memory capacities can be combined.
Only unbuffered DDR3 memory mod ules without ECC may be used.
DDR3 memory m odules must comply with the PC3-10600 or PC3-12800 speci fication.
Maximum syste m performance is achieved when identical memory modules
are used in Cha nnel A and Channel B.
Depending on how th e syste m is configured, the visible m ain m emory c an be reduced.
SO-DIMM 1 Channel A
SO-DIMM 1 Channel B
Number of m emo ry mo du les in serted
Slot to be u
sed
12
Channel A, slot 1
xx
Channel B, slot 2
x
The inst
allation/removal is described in the "Basic information on mainboard" manual.
Fujitsu Technology Solutions 15
To Next Page
Loading...
