Installing/removing m ain m emo ry En
glish - 7
Installing/removing main mem
ory
Technic al data
Technology
DDR4 1866 / 2133 M Hz SO-DIMM modu les 260 pin; 1.2V; 64 bit,
no ECC
Tota l size
2 to 32 GB DDR4
Module size
2, 4, 8 or 16 GB per module
At least one memory mo dule must be installed. Memory m odules with different
memory capacities can be combined.
Only unbuffered DDR4 memory m od ules without ECC may be used .
DDR4 memory modules must comply with the DDR4-1866 or DDR4 -2133 specification.
DDR4-2133 modules are downward compatible and are operated depending on the CPU.
Maximum system performance is achieved when identical memory modules
are used in Channel A and Channel B.
Depending on how the syste m is c on figured, the visible main m emory can be reduced.
Channel A, Slot 1
Channel B, Slot 1
Number of memory modules inserted
Slot to be used 1 2
Channel A, slot 1
xx
Channel B, Slot 1
x
The installation/removal is described in the "Basic information on mainboard" manual.
Fujitsu 21
To Next Page
Loading...
