EasyManua.ls Logo

Fujitsu DESKPOWER 2000 Series - Opening the System Unit

Fujitsu DESKPOWER 2000 Series
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
Opening the System Unit
Switch the PC off. The PC must not be in the Suspend mode!
CAUTION
Please take note of the safety information in the "Important notes" chapter.
Pull the power plug out of the mains outlet!
If any cables attached to the system unit are obstructing you, pull out the connectors on the
system unit.
Place the system unit in a convenient working position.
a
1
1
1
2
3
2
1 Loosen the screws (1).
2 Push the top cover in the direction of the arrow (2) until the distance (a) is approximately
10 mm.
3 Lift off the top cover in an upward direction (3).
CHAPTER 4 Martini2 (27-44) 12/21/01, 10:15 AM29

Related product manuals