Fujitsu DESKPOWER 2000 Series - Electrical Data

44
1 Technical Data
■ Electrical Data
Product Name
Regulations complied with:
Protection class:
Rated voltage range: (selectable)
Frequency:
Max. rated current
• System unit with monitor socket:
• Monitor socket (output):
Max. power draw in operation (peak):
Min. power draw in operation:
Power draw in energy saving mode (ACPI-S3
mode):
Power draw in 'ready-to-operate' mode
(ACPI-S3 mode):
Noise emission
• Sound pressure L
pAm
(Idle mode):
• Sound power level L
WAd
(Operation mode):
• Sound power level L
WAd
(Idle mode):
*) These values only apply for a SCENIC T with the configuration below. Installing additional components can
cause the specified values for power draw and sound emission to be exceeded.
Processor (256 KB cache):
Main memory:
Floppy disk drive:
Hard Disk unit:
CD-ROM drive:
Graphics:
Audio:
LAN:
Dimensions
Width/depth/height:
Weight
with the basic configuration:
Environmental conditions
Environment class 3K2
Environment class 2K2
Temperature:
• Operating (3K2)
• Transport (2K2)
Condensation in operating must be avoided.
Clearance required to ensure adequate ventilation:
•left
• front
• rear
Pentium 4 Prozessor 2 GHz
128 Mbyte SDRAM
1,44 Mbyte
40 Gbyte, 7200 rpm
48fach
GM3000-16, Nvidia
AD1885 AC'97, onboard
Intel 8256ZET Ethernet Controller
196 mm/350 mm/360 mm
ca. 8 kg (78,5 N) in basic configuration
DIN IEC 721 part 3-3
DIN IEC 721 part 3-2
15 °C .... 35 °C
–25 °C .... 60 °C
min. 200 mm
min. 200 mm
min. 200 mm
IEC 60950 / VDE 0805, UL 1950
CSA 22.2 No.950
I
100 V - 127 V / 200 V - 240 V
50 Hz - 60 Hz
136 W *
48 W *
2,5 W *
2,9 W *
28 dB *
45 dB *
42 dB *
DESKPOWER 2000
Power supply 110 W
100 V -127 V / 5,5 A
200 V - 240 V / 3,0 A
100 V -127 V / 3 A
200 V - 240 V / 1.5 A
Power supply 200 W
7,0 A
3,5 A
3,0 A
1,5 A
CHAPTER 5 Martini2 (43-48) 6/12/02, 1:45 PM44