Ports and operating elements
Removing and installing the bat
tery
NotesBattery
Only use batteries approve d by Fujitsu PC Asia Pacific P te Ltd. for your notebook.
Never use force w hen inserting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Removing the battery
► Switch the notebook off and pull the power p lug out of the mains socket.
Battery
► Close the LCD screen so that it locks i
nto place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on
a stab le, sturdy, flat surface . If necessary, lay an
anti-slip cloth on this surface to pre
vent the notebook from being s cratched.
2
1
3
► Push the battery lock in the direction of
the arrow (1) as far as it will go.
► Slide the locking device in the dire
ction of
the arrow (2) and hold it in place.
► Pull the battery o ut of the casing in the
direction of the arrow (3).
Battery: insertin g
2
1
► Push the batte ry into the bat
tery
compartment so that the cont
acts
enter first (1).
Battery
► Push the battery into the battery
compartment until you feel it click into place.
► Push the battery lock in the d
irection of
the arrow (2) up to the stop.
A26391-K240-Z220-1 -7619 , edition 1 11
To Next Page
Loading...
