Fujitsu LIFEBOOK E558 User Manual (English)

Other manuals for Fujitsu LIFEBOOK E558

Questions and Answers:

L
Larry GatesAug 18, 2025
Why won't my Fujitsu Laptop turn on?
- J
  Jason GallagherAug 18, 2025
  Your Fujitsu Laptop might not start because the battery isn't correctly installed. Check that the battery is correctly installed in its compartment and try switching the notebook on. Alternatively, the battery may be dead. In this case, charge the battery, insert a charged battery, or connect the AC adapter to the notebook. Another possibility is that the AC adapter isn't properly connected. Ensure the AC adapter is properly connected to the notebook and then switch it on.
A
aaron57Aug 20, 2025
How to fix wireless connection on Fujitsu Laptop?
- T
  Travis EvansAug 21, 2025
  If the wireless connection on your Fujitsu Laptop isn't working, first ensure that the wireless component is switched on. If it is on but the connection still fails, verify that the wireless connection is enabled by the software.
M
Michael HermanAug 23, 2025
How to fix blank LCD screen on Fujitsu LIFEBOOK E558 Laptop?
- D
  Deborah ReynoldsAug 23, 2025
  If your Fujitsu Laptop's LCD screen remains blank, the screen might be switched off. Try pressing a key or touching the touchpad. Alternatively, an external monitor or television set might be connected. Press the key for changing over the screen output.
C
Corey StevensonAug 25, 2025
Why does my Fujitsu LIFEBOOK E558 Laptop keyboard type numbers instead of letters?
- K
  Kyle HaysAug 26, 2025
  If your Fujitsu Laptop is displaying only numerals when you type certain characters, the virtual number keys may be activated. Press the Num button to deactivate them.
C
Cathy WhitakerAug 27, 2025
What to do if external monitor remains blank with Fujitsu Laptop?
- C
  Carolyn ClarkAug 27, 2025
  If your external monitor remains blank when connected to your Fujitsu Laptop, check these potential causes: First, ensure the monitor is switched on. Second, if power saving mode is activated, press any key to continue. Third, adjust the brightness of the monitor if it's set too low. Fourth, if the screen output is set to the notebook’s LCD screen, press the key for changing over the screen output. Finally, check whether the AC cable and data cable are properly connected to both the external monitor and the notebook. If not, switch off the external monitor and the notebook, ensure all cables are properly connected, and then switch them back on.
D
Debra DennisSep 1, 2025
What to do if my Fujitsu LIFEBOOK E558 stops working?
- M
  Michael DavenportSep 1, 2025
  If your Fujitsu Laptop stops working, it might be in energy-saving mode; end energy-saving mode. Alternatively, an application program may have caused the malfunction. Close the application program or restart the notebook. Finally, the battery might be dead. Charge the battery, insert a charged battery, or connect the AC adapter to the notebook.
Y
yfernandezSep 3, 2025
Why is my Fujitsu LIFEBOOK E558 not printing?
- J
  Jeffrey StaffordSep 3, 2025
  If your printer is not printing from your Fujitsu Laptop, first ensure that the printer is switched on and ready for operation. Next, check that the data cable connecting the notebook to the printer is properly connected. Lastly, verify that the correct printer driver is loaded.
G
Gary HughesSep 6, 2025
How to improve LCD screen readability on Fujitsu Laptop?
- G
  Gregory SmithSep 6, 2025
  If the LCD screen of your Fujitsu Laptop is difficult to read, it might be due to reflected glare. Try turning the notebook or altering the tilt of the LCD screen. Also, increase the brightness of the screen.
M
Mr. Troy HowardSep 8, 2025
Why is the image unstable on external monitor connected to Fujitsu Laptop?
- S
  Stephanie WeberSep 8, 2025
  If the external monitor connected to your Fujitsu Laptop is blank or the image is unstable, the wrong external monitor may have been selected, or the wrong screen resolution set for the application program. Terminate the application program under Windows by pressing Alt + F4. If the error persists after terminating the program, use the key for switching the screen output in order to switch to the LCD screen of the notebook. Change the screen resolution and select the correct monitor in your operating system's settings.
R
Rachel CooperSep 12, 2025
How to correct date and time on Fujitsu Laptop?
- T
  timothyhensleySep 12, 2025
  To correct the date or time on your Fujitsu Laptop, use the BIOS-Setup-Utility to set the date and time in the Main menu. If the issue persists, contact your sales outlet or our hotline/service desk.

Fujitsu LIFEBOOK E558 Specifications

General

Processor	Intel Core i5-7200U
Storage	256 GB SSD
Display	15.6-inch
Resolution	1920 x 1080
Graphics	Intel HD Graphics 620
Operating System	Windows 10 Pro
Bluetooth	Bluetooth 4.1
RAM	8GB DDR4
Ports	USB 3.0, HDMI, Ethernet, SD card reader
Wireless	802.11ac Wi-Fi