What to do if my Fujitsu Laptop does not start after switching it on?
If your Fujitsu Laptop doesn't start, there could be a few reasons. First, ensure the battery is correctly installed in its compartment. If that's not the issue, the battery might be dead; try charging it, inserting a charged battery, or connecting the AC adapter. Finally, check that the AC adapter is properly connected to the laptop.
How to fix the Fujitsu LIFEBOOK E559 LCD screen if it remains blank?
If your Fujitsu Laptop's LCD screen remains blank, try pressing any key or touching the touchpad to see if the screen is switched off. If you have an external monitor or television connected, press the key for changing over the screen output.
Why is the wireless connection to a network not working on my Fujitsu Laptop?
If the wireless connection to a network is not working, first ensure that the wireless component is switched on. If it is on but the connection still doesn't work, check whether the wireless connection is enabled by the software.
Why when I enter characters on the keyboard of my Fujitsu LIFEBOOK E559, only numerals are written?
If only numerals are written when you enter characters on the keyboard of your Fujitsu Laptop, the virtual number keys of your device are activated. Press the Num button.
Why does my Fujitsu Laptop stop working?
Your Fujitsu Laptop might stop working due to several reasons. It could be in energy-saving mode, so try ending that mode. An application program might have caused a malfunction; try closing the application or restarting the laptop. Also, the battery might be dead; in this case, charge the battery, insert a charged one, or connect the AC adapter.
What to do if the external monitor remains blank when connected to my Fujitsu LIFEBOOK E559 Laptop?
If the external monitor remains blank, first ensure it is switched on. Check if power saving has been activated by pressing any key. Adjust the brightness of the monitor. Ensure the screen output is not set to the notebook’s LCD screen. Verify that the AC cable and data cable are properly connected to both the external monitor and the Fujitsu Laptop, then switch both devices on.
How to fix if the printer does not print from my Fujitsu LIFEBOOK E559 Laptop?
If the printer does not print, ensure that it is switched on and ready for operation. Check that the data cable connecting the Fujitsu Laptop to the printer is properly connected. Verify that the correct printer driver is loaded.
How to improve readability if the LCD screen of my Fujitsu Laptop is difficult to read?
If the LCD screen of your Fujitsu Laptop is hard to read, it may be due to reflected glare; try turning the laptop or adjusting the tilt of the screen. You can also increase the brightness of the screen.
What does it mean if my Fujitsu LIFEBOOK E559 makes acoustic warnings?
If your Fujitsu Laptop beeps every few seconds, it means the battery is almost dead. Charge the battery.
General| Storage | 256GB SSD |
|---|---|
| Display | 15.6-inch, 1920x1080 |
| Operating System | Windows 10 Pro |
| Battery Life | Up to 10 hours |
| Ports | HDMI, VGA, Ethernet, SD card reader |
Essential safety information and precautions for operating the notebook safely.
Steps for unpacking, choosing a location, and connecting the AC adapter.
Steps to configure supervisor and user passwords within the BIOS Setup Utility.
Enabling password protection for booting the OS and the hard disk.
General precautions and safety notes before servicing internal notebook components.
Procedures for replacing memory modules, M.2 drives, and hard disk drives.
How to access, navigate, and make changes within the BIOS Setup Utility.
Guidance on resolving common issues and restoring the system from backups or recovery drives.
Identifying common error messages and their potential causes and solutions.
Instructions for creating recovery media and reinstalling Windows 10.
To Next Page