First-time setup of your device
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 16.
If your de vice is equipped with a Windows operating system, the necessary
hardware drivers and supplied so ftware are already pre-installed.
Before switching it on for the first time, connect the device to the AC voltage using
the A C adapte r, see "
Connecting the AC adapter ", Page 22. The AC adap ter must
remain connected during the whole of the installation process.
A system test is performed when your device is first s witched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on th e screen.
NEVER switch off your device during the first-time setup process.
When the device is delivered, the battery is located in the battery compartment. The battery
must be charged if you want to ope rate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy saving functions.
For instructions on how to connect external devices (e .g. mouse, printer) to your
device, please refer to the operating manual for your device.
Unpacking and
checking the device
If you find tha t damage has occurred during transport, please notify
your local sale s outlet immediately!
► Unpack all th e individual parts.
PackagingTransport
► Check your
device for any visible damage which m ay have occurred during transportation.
You may ne
ed to reuse the packaging in the future, fo r example if
you need t
o ship your device.
Fujitsu 21
To Next Page
Loading...
