First-time setup of your device
Choose a location
ChoosealocationSetupACadapter
Choose a suitable location for the de vice before setting it up. In doing
so, please follow these instructions:
• Never place the device or th e AC adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This ca n block the air vents and cause overheating and damage.
• The underside of the device heats up during no rmal operation. Prolonged contact
with the skin can become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please n ote that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.94 inches away from the device
and its AC adapter to ensure adequate ventilation.
• Never cover the ventilation openings of the device.
• Do not expose the device to extreme environmental conditions.
Protect the device against dust, humidity and heat.
Connecting the AC adapter
MakingreadytouseACadapter
Please follow the safety instructions in the section "Important notes", Page 16.
The supplied A C cable conforms to the r equirements of the country in which
you purchased your device. Make sure tha t the AC cable is approved for
use in the coun try in which you intend to use it.
3
1
2
►
►
22 Fujitsu
DC IN
Connect the AC cable (1) to the AC
adapter provided for use with the device,
see chapter "Technical data", Page 84.
Connect the AC adapter cable (2) to the
DC jack (DC IN) of the device.
Plug the AC cable (3) into a power outlet.
►
To Next Page
Loading...
