Removing and installing components
during servicing
Attaching the cover
2
1
2
► Place the cover in the correct location (1).
► Tighten the scre
ws (2).
The LIFEBOOK E5
49 has 2 screw s, the LIFEBOOK E559 has 3 screws.
► Complete the installation, see "
Finishin g component removal", Page 73.
Finishing component removal
After y ou have r emoved or changed the system components as required, please
prepare your device for op eration again as follows:
► Install t he battery again, see "
Installing a battery", Page 42.
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables th at were previously disconnected.
Fujitsu 73
To Next Page
Loading...
