Connecting external devices
USB port with charging function (Anytime USB charge)
You can use this USB port to charge or supply power to a USB device (e.g. to charge
a PDA or a mobile p hone or to connect a USB lamp).
This is possible even when th e notebook is switched off; in the BIOS-Setup-Utility in the
Advanced menu the function Anytime USB Charge must be activated. If the setting AC is selected
thereby, the device will only be c harged when the AC adapter is connected.
Calling and using the BI OS-Setup-Utility is described in the section "
Settings
in BIOS Setup Utility", Page 74.
USBchargingfunction
It is recommende d that the notebook be operated with the AC adapter connected
whenever the USB port with ch arging function is in use, as this function will drain
the battery more quickly if an external USB device is being charged.
The AC adapter must already be connected when the notebook is switched
off, as otherwise the USB charging function will be disabled and the
connected USB devices will not be charged.
Some USB devices (e.g. mobile telephony) require a driver in order to utilize the USB
charging function. In th is case the USB charging function will n ot w ork w hen the
notebook is switched off, as no drivers are active when the no tebook is switched off.
► Connect the data cable to the
external device.
► Connect the data cable to a USB port
(Anytime USB charge) of the notebook.
How t o remove USB devices correctly
Always cor
rectly remove the device according to the rules described below,
to ensure
that none of you r data is lost.
► With the left mou se bu tton, click on the symbo l in the taskbar for safe removal of hardw are.
► Select t
he device you wish to shut down and remove.
► Press the "Enter" key.
Wait fo
r the dialog box which tells you that it is now safe to remove the device.
Fujitsu 63
To Next Page
Loading...
