Working with t he noteboo k
Connecting the AC adapter to the port replicator
3
1
2
► Connect the AC cable to the AC adapter (1).
► Plug the AC cable into the power outlet (2).
► Connect the AC adapt er cable to the DC
jack (DC IN) of the port replicator (3).
When the notebook is connected to a port replicator, the operating system creates
a hardware profile for the "Docked" mode. In this profile, for example, the m onitor
which was last used for output is saved as a setting. This profile will be loaded as
soon as the notebook is conn ected to a port replicator of the same type.
Switching on the notebook via the port replicator
► Press the ON/OFF button on the po rt
replicator to switch on the notebook.
The power-on indicator of the port
replicator lights up.
48 Fujitsu
To Next Page
Loading...
