Removing and in stalling components
during servicing
Attaching the cover
2
1
2
► Place the cover in the correct location (1).
► Tighten the scre
ws (2).
The LIFEBOOK E5
48 has 2 screws, the LIFEBOOK E558 has 3 s crews.
► Complete the installation, see "
Finishin g component r emoval", Page 70.
Finishing component removal
After you have removed or changed the system components as required, please
prepare your device for operation again as follows:
► Install the battery again, see "
Installing a battery", Page 41.
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that were p reviously disconnect ed.
70 Fujitsu
To Next Page
Loading...
