Fujitsu LIFEBOOK E558 - Installing the M.2 Module; Removing the M.2 Module

Removing and installing components
during servicing
Installing t h e M.2 module
► LIFEBOOK E558: If relevant, insert the M .2 adapter in the service compartment.
21
► Position the M.2 module in the slot on the mainboard at a slight angle,
in the direction of the arrow (1).
► Secure the W.2 module in its location with the screw (2).
Removing the M .
2 module
2
1
► Loosen the screw (1).

The M.2 module folds slightly upwards.
► Pull the M.2 module out of the slot on the mainboard in the direction of
the arrow (2) and remo ve it from the casing.
Fujitsu 67