Fujitsu ESPRIMO P2560 Datasheet

Fujitsu ESPRIMO P2560

6 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Data Sheet Fujitsu ESPRIMO P2560 Desktop PC

Page 1 / 6 www.fujitsu.com/fts/ESPRIMO

Fujitsu recommends Windows® 7.

Data Sheet

Fujitsu ESPRIMO P2560

Desktop PC

Your Immediately Available Office PC

The Fujitsu ESPRIMO P2560 is designed for price-conscious customers and is equipped with standard

Intel® technology. This system meets every ofce requirement - especially those typical for small

and medium-sized businesses. Fujitsu ESPRIMO P2560 is available from your dealer at all times and

therefore an ideal choice once the decision to purchase has been taken.

Attractive price

PC for the day-to-day challenges of ofce life

 Proven Intel® technology

Designed and engineered in Germany

Outstanding quality and stable functions based on German production standards

 The development, production and function tests are all under one roof in Germany

Immediate availability

Short waiting times once purchase decision has been taken.

 Preferred versions available on-site

Other manuals for Fujitsu ESPRIMO P2560

Operating Manual52 pages

Questions and Answers:

T
torresrobertAug 15, 2025
Why does my Fujitsu ESPRIMO P2560 monitor remain blank?
- C
  Christine WeissAug 15, 2025
  If the Fujitsu Desktop monitor remains blank, several factors could be at play. First, ensure the monitor is powered on. If power saving mode is active, press any key or deactivate the screen saver, entering your password if prompted. Check the brightness setting and adjust if it's too low. Verify that the power and monitor cables are securely connected to both the device and a grounded mains outlet.
A
Angela RamosAug 18, 2025
How to fix a Fujitsu ESPRIMO P2560 Desktop with power indicator off?
- C
  caitlinhendersonAug 18, 2025
  If the power indicator on your Fujitsu Desktop remains off after switching it on, it could be due to a faulty mains voltage supply. Ensure the power cable is correctly plugged into the device and a grounded mains outlet, and that the main switch at the rear is set to the "I" position. If the internal power supply is overloaded, pull the power plug out, wait a moment, plug it back in, and try switching the device on again.
G
glenn45Aug 21, 2025
What to do if no mouse pointer is displayed on Fujitsu Desktop?
- G
  Gene HancockAug 22, 2025
  If there's no mouse pointer displayed on the screen of your Fujitsu Desktop, it's possible the mouse isn't correctly connected. Properly shut down the operating system and switch off the device. Check the mouse cable connection to the system unit, including any adapters or extension leads. Ensure only one mouse is connected before switching the device back on.
R
Ryan CoxAug 25, 2025
What to do if Fujitsu ESPRIMO P2560 cannot be switched off?
- V
  Vanessa CharlesAug 25, 2025
  If your Fujitsu Desktop cannot be switched off with the ON/OFF switch, first, try pressing the ON/OFF switch again. If that doesn't work, the system may have crashed. In this case, keep the on/off switch pressed for at least 4 seconds until the machine switches off. Be aware that this can lead to data loss and potential error messages upon the next system start.
N
Nathan NelsonAug 28, 2025
How to correct the time and date on a Fujitsu ESPRIMO P2560 Desktop?
- M
  Michael BurnsAug 28, 2025
  If the time and/or date is not correct on your Fujitsu Desktop, set the correct time and date within the operating system. Alternatively, set the correct time and/or date in the BIOS Setup. If the time and date are repeatedly wrong when you switch on your device, the lithium battery may be discharged and needs replacement.
K
Kevin LoweAug 31, 2025
Why the floppy disk cannot be read or written on Fujitsu Desktop?
- S
  schwartzarthurAug 31, 2025
  If the floppy disk cannot be read or written on your Fujitsu Desktop, check whether the write protection of the floppy disk or the floppy disk drive is activated. Also, verify in the BIOS Setup that the floppy disk drive controller is enabled. Finally, ensure that the cables of the floppy disk drive are properly connected.
R
Ray VargasSep 3, 2025
How to fix wrong monitor settings on Fujitsu ESPRIMO P2560 Desktop with Windows XP?
- J
  Jose JohnsonSep 4, 2025
  Restart the Fujitsu Desktop. Press F8 while the system is booting. Either the Windows Advanced Start Options menu or the menu for selecting the operating system appears. If the menu for selecting the operating system appears, press F8. Select Safe Mode or Safe Mode with Network. Go to Start – Settings – Control Panel – Display and the tabs Appearance, Themes, Settings to set the correct values for the connected monitor as described in the operating manual of the monitor.
J
Joseph WarrenSep 7, 2025
How to correct incorrect monitor settings in Windows Vista on Fujitsu Desktop?
- Y
  Yvette JohnsonSep 7, 2025
  Restart the Fujitsu Desktop. Press F8 while the system is booting. Either the Windows Advanced Start Options menu or the menu for selecting the operating system will appear. If the menu for selecting the operating system appears, press the F8 key. Select Safe Mode or Safe Mode with Network. Go to Start symbol – (Settings) – Control Panel – Appearance and Personalization – Personalization and enter the correct values for the connected monitor as described in the operating manual of the monitor.
N
Nicholas BerrySep 12, 2025
How to configure the correct monitor settings on a Fujitsu Desktop running Windows 7?
- J
  jeffreybeckerSep 12, 2025
  Restart the Fujitsu Desktop. Press F8 while the system is booting. Either the Windows Advanced Start Options menu or the menu for selecting the operating system appears. If the menu for selecting the operating system appears, press F8. Select Safe Mode or Safe Mode with Network. Go to Start – Control Panel – Appearance and Personalization – Display to enter the correct values for the connected monitor as described in the operating manual of the monitor.

Fujitsu ESPRIMO P2560 Specifications

General

Storage	Up to 1 TB HDD
Network	Gigabit Ethernet
RAM	8 GB DDR4
LAN	Gigabit Ethernet
Optical Drive	DVD-ROM or DVD Super Multi
Dimensions	175 x 419 x 353 mm

Related product manuals

Preview: Fujitsu ESPRIMO P400

Fujitsu ESPRIMO P400

Preview: Fujitsu ESPRIMO P6012

Fujitsu ESPRIMO P6012

Fujitsu ESPRIMO P9910

Preview: Fujitsu ESPRIMO P5635

Fujitsu ESPRIMO P5635

Preview: Fujitsu ESPRIMO PH300

Fujitsu ESPRIMO PH300

Fujitsu ESPRIMO P5010

Preview: Fujitsu ESPRIMO P5730

Fujitsu ESPRIMO P5730

Preview: Fujitsu ESPRIMO P4 Series

Fujitsu ESPRIMO P4 Series

Fujitsu ESPRIMO P7 Series

Preview: Fujitsu ESPRIMO P910 E85+

Fujitsu ESPRIMO P910 E85+

Fujitsu ESPRIMO P5010P VFY

Preview: Fujitsu ESPRIMO P372 Series

Fujitsu ESPRIMO P372 Series