Separation Roller
Ring
Pad (Cleaning Area)
Pad Assy
Cleaning Instructions for fi-4860C2 Scanner
Consumables Part Number
Consumable Kit
CON-4315-008A
Cleaning Kit
SC-CLE-HV
Cleaning the Pad—Recommended Cleaning Cycle Every 10,000* Sheets
Press down on the upper part of the
guide plate with your fingers at the two
positions shown, rotate the plate towards you
and remove it.
Wipe the translucent rubber part of the pad
ASSY using cleaning paper moistened with
cleaner F1.
Cleaning the Pick Roller—Recommended Cleaning Cycle Every 10,000* Sheets
Slide the Pick Roller unit to the left to
disengage the clutch ring from the shaft.
Wipe both Pick Rollers (2 positions) and
the Separation Roller using cleaning paper
moistened with F1cleaner.
1
2
3
Pull the ADF release lever towards you
and lift up the ADF upper sheet guide.
1 2 3
While pulling the ADF lever towards you, lift
up the ADF upper sheet guide.
Cleaning the Brake Rollers—Recommended Cleaning Cycle Every 10,000* Sheets
Press down on the upper part of the guide
plate with your fingers pull the plate towards
you to remove.
Lift the bail of the Brake Roller upwards
and release the lock. Pull the Brake Roller
forward to remove it. Wipe roller
surface using cleaning paper
moistened with cleaner F1.
1 2 3
While pulling the ADF lever towards you, lift
up the ADF upper sheet guide.
BEFORE CLEANING
Remove documents from
the stacker. Pull up the
lever on the right front of
the upper transport and
raise it
.
* May be extended to 50,000 depending on paper type and condition.
Guide Plate
Guide
Plate
Pad
Assy
Guide Plate
ADF Upper Sheet Guide
Ring
Shaft
Pick Roller Unit
Pick Roller
Unit
Guide Plate
ADF Upper Sheet Guide
Pad Assy
Guide Plate
Ball
Brake Roller
To Next Page
Need help?
General
