Ultrasonic
Sensor
Glass
Pad Assy.
Eject Rollers
Pick Roller
Feed Rollers
Ultrasonic Sensor
Clean lightly.
Cleaning Instructions for
fi-6010N Network ADF Scanner
It is recommended that these items be
cleaned EVERY 1,000 SCANS
Consumables Part Number
Consumable Kit
CON-3289-003A
Cleaning Kit
SC-CLE-WGD
Using F1 Impregnated Cleaning Wipes
Pad Assy
Wipe downwards. When cleaning take care to prevent the wipe from catching on the metal
parts.
Turn the Scanner OFF while cleaning the following locations
ADF Glass Surfaces x 2
Located on the ADF cover and opposite side. Clean lightly.
Pick Roller
Clean lightly taking care not to scratch the surface.
P. T. O.
Eject Rollers x 4
Clean lightly taking care not to roughen the surface.
ADF
Cover
ADF Release
Button
BEFORE CLEANING
Push the ADF release button,
hold both sides of the top cover
and lift open
To Next Page
Need help?
General