8
ScandAll PRO is software for scanning images, which is in
compliance with both TWAN/ISIS standards. Using
FUJITSU TWAIN 32 or FUJITSU ISIS together with
ScandAll PRO allows you to create document images.
1. Insert the Setup CD-ROM into the CD drive.
⇒ <SETUP DISK START UP SCREEN> appears.
2. Click [INSTALL PRODUCTS], and then click
[ScandAll PRO].
3. Select a language for the installation on [Choose
Setup Language] dialog box, and then click the [OK]
button.
4. Proceed with the installation, following the on-
screen instructions.
5. When the [InstallShield Wizard Complete] dialog
box appears, click the [Finish] button.
If Error Recovery Guide is installed on your computer, you
can troubleshoot errors that may occur in the scanner by
simply following the on-screen instructions.
If you did not install Error Recovery Guide together with the
scanner driver, follow the procedure below to install it.
1. Insert the Setup CD-ROM into the CD drive.
⇒ <SETUP DISK STARTUP SCREEN> appears.
2. Click [INSTALL PRODUCTS], and then click [Error
Recovery Guide].
3. Select a language for the installation in the [Choose
Setup Language] dialog box, and then click the
[Next] button.
4. Install the application, following the on-screen
instructions.
5. When you see the [InstallShield Wizard Complete]
dialog box, click the [Finish] button.
Image Processing Software Option (Trial)
For details on the installation of Image Processing Software
Option (Trial Version), refer to the "Image Processing
Software Option User’s Guide."
QuickScan Pro™ is image capturing software based on the
ISIS standard. By using this software together with FUJITSU
ISIS, you can scan documents with the scanner. Follow the
procedure below to install the trial version of QuickScan
Pro™ that comes with this scanner.
1. Insert the Setup CD-ROM into a CD drive.
⇒ <SETUP DISK STARTUP SCREEN> appears.
2. Click [INSTALL PRODUCTS], and then click
[QuickScan Pro (Trial)].
3. In the [Welcome to the InstallShield Wizard for
QuickScan 4.5] dialog box, click the [Next] button.
4. Type in necessary information in the [Customer
Information] dialog box, and then click the [Next]
button.
5. Install the application, following the on-screen
instructions.
Be sure to log on as a user with "Administrator" privileges.
For information about the features of ScandAll PRO, refer to
Help topics in ScandAll PRO.
Be sure to log on as a user with "Administrator" privileges.
"QuickScan Pro™" included in the Setup CD-ROM is a trial
version that can be executed 30 times before it is disabled.
If you wish to continue using this product, please consider
purchasing the full version. (When you install the trial
version, use the displayed Serial Number.)
For information about the features and operations of
QuickScan Pro™, refer to "QuickScan Overview" or
"QuickScan Help."
Form the [start] menu, select [All Programs] D [EMC
Captiva] D [QuickScan], and then select a desired file.
To Next Page
Loading...
