Fujitsu FI-800R - Location and Frequency

Location and Frequency
ATTENTION
Cleaning cycles may vary depending on the condition of the documents. Also, cleaning
must be performed more frequently when the following types of documents are scanned:
● Smooth-faced documents such as coated paper
● Documents with printed text/graphics that almost cover the entire surface
● Chemically-treated documents such as carbonless paper
● Documents containing a large amount of calcium carbonate
● Documents written in lead pencil
● Documents on which the toner is not sufficiently fused
Cleaning Location
Frequency
Inside of the scanner
(ADF)
Pad unit
Every 1,000 sheets
Pick roller
Glass
Ultrasonic sensor
Document sensor
Feed roller
Eject roller
Outside of the scanner
Scanner
Clean when dust and dirt
are noticeable.
The inside of the scanner (ADF) needs to be cleaned regularly for every certain number of
sheets scanned. The scanner records the number of sheets scanned so that you can check
the number of sheets scanned after you cleaned it last.