39
SECTION 1
1. Click the Start button and select Control Panel.
2. Click Performance and Maintenance, and then System.
3. Click the Hardware tab and select Device manager.
4. Click the plus sign beside DVD/CD-ROM drive, and then double-click the CD/DVD drive
that is displayed under it.
5. On the Properties page, click “Enable this CD-ROM device to play digital audio CDs“ to
deactivate it ( changes to ), and then click OK.
When you are using Media Player to play audio CDs, perform the steps below, too.
6. Start Media Player.
7. Click Tools, then Options.
8. On the Devices page, make sure that the DVD/CD-RW drive is selected, and then click
Properties.
9. Click the option button for Analog under Playback and then click OK.
10. Click OK in the Options window.
11. Restart your computer.
Critical Point
The region code of your computer is [3] by default. Region codes are assigned to DVD-
Videos on a country-by-country basis. DVD-Videos with a region code other than [3] may not
be played back on your CD/DVD drive.
Some DVDs are protected from unauthorized copying. For copyright protection, your computer
has descramble and authentication functions. So, if attempt is made to play an audio or
video file copied from a copy-protected disc, an authentication error will occur to stop if from
being played back.
LB01_Brie (37-44) 17/10/02, 5:29 PM39
To Next Page
Loading...
