46
2. Unplug the telephone’s modular cable from the phone jack on the wall.
3. Plug the modular cable from your computer in the phone jack on the wall.
Insert the other end of the modular cable from your computer into the modular type phone jack.
Modular type Rosette type
IMPORTANT
• If a rosette type phone jack is used, it needs be changed to a modular type.
Changing a phone jack from rosette type to modular type must be done by an authorized
technician or under his or her supervision. So, if you need to change the phone jack, you will
have to ask your local office or branch.
Pull out the cable while
holding down the stopper.
LB01_Brie (45-47) 17/10/02, 5:30 PM46
To Next Page
Loading...
