First-time setup of your device
First-time setup of your devic
e
First- timese tupGettingstarted
Please read the chapter "Important notes", Page 12.
If your device is equipped with a Windows ope rating system, the necessary
hardware drivers and supplied software are already pre-installed.
Before you switch on the device for the first time, connect it to the mains voltage
using the mains adapter, see "
Mains adapter connecting", Page 17.Themains
adapter must be connected during the entire insta llation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please fo llow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
When the device is delivered, the battery is located in the battery compartment. T he battery
must be charged if you want to operate your device using the battery.
When used on the m ove, the built-in battery provides the device with the ne cessary powe r. You
can increase the ope rating time by using the available energy-saving functions.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, p lease refer to the operating manual for your device.
Unpacking and
checking the device
Should y ou discover any damage that occurred during transportation,
notify your local sales out let immediately!
► Unpack all the individual parts.
PackagingTransport
► Check your
device for any visible damage which may have occurred during transportation.
You m ay ne
ed the packag ing in the future, if you need to transport your device.
16 Fujitsu
To Next Page
Loading...
