Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Change s - save ch
anges and exit BIOS Setup Utility
► To save the c urrent m enu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.
The notebook is rebooted
and the new settings come into effect.
Exit Discarding Changes – Discard changes and
exit BIOS Setup Utility
► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was ca lled remain effective. BIO S
Setup Utility is te rminated and the notebook is r ebooted.
Load Setup Defaul
ts – Copy Standard Entries
► To co py the s tandard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Changes – Discard changes without exiting
the B IOS Setup Utility
► To discard the changes you have made, select Discard Changes and Yes.
The settings in place when BIOS Setup Utility w as called remain effective.
You can now make additional settings in the BIOS S etup Utility.
► IfyouwanttoexitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Ye s .
Save Chan
ges - save changes without exiting
the B IOS Setup Utility
► To save th e changes, select Save Changes and Ye s .
The changes are saved. You can now make additional settings in the BIOS Setup Utility.
► If yo u want to exit B IOS Setup Utility with these settings, c hoo se Exit Saving Changes and Yes.
Save Changes and Power Off
► To save the change s and sw itch off your device, select Save Changes and Power Off and Yes.
The changes are saved. Your d evice is shut down.
52 Fujitsu
To Next Page
Loading...
