Security functions
Deactivating hard disk protection
To cancel a password without setting a ne w one, proceed as follows:
► Call up th e BIOS Setup and select the Security menu.
► Mark the Hard Disk Security field and press the Enter key.
► In the Drive0 area mark the Set Master Password field and p ress the Enter k ey.
You will be initially reque sted to enter the old password by the Enter current Password prompt.
You will th en be requested to enter a new password by th e Enter new Password prompt.
► After entering the password , press th e Enter key three times.
► Fr om the Exit menu, choose the optio n Exit Saving Changes.
► Press the Enter key and select Ye s.
The notebook reboots, and password protection for th e hard disk is cancelled.
► To cancel the password for the second hard disk (D r ive1 ), go to the Drive1 area
and select the field Set Master P assword, then proceed in exactly the same way as
for cancelling the password for the first hard disk (Dr ive0 ).
Fujitsu Technology Solutions 49
To Next Page
Loading...
