Working with the no tebook
Using the power-management features
PowerPowerBattery
The notebook uses less power when the available power-management features are used. You
will then be able to work longer when using the battery before having to recharge it.
Power efficiency is increased and environmental pollution reduced. By
choosing the best power options, you can make significant savings and
at the same time help protect the en vironment.
When you close the LCD screen, depending on the setting in Windows, the
notebook automatically enters a power saving mode.
We recommend the follow ing settings:
Function On external power On battery power
Turn off monitor After 10 minutes After 5 minutes
Turn off hard disk(s) After 15 minutes After 10 minutes
Energy saving (S3) After 20 minutes After 15 minutes
Hibernate mode (S
4)
After 1 hour After 30 minutes
► Select the power ma
nagement functions in your Control Panel.
► Select the Screen Saver in your Control Panel.
If you need further information a bout an option, you can get he lp with most
settings by pressing
F1
to open the Micr o so ft Help.
When the notebook is in power-saving mo de, the following must b e re membered:
During power saving mode, open files are held in the main memory
orinaswapfile on the hard disk.
Never turn off your notebook w hile it is in a power saving mode. If the built-in battery is
nearly empty, close the open files a nd do not go into power saving mode.
If you do not intend to use your notebook for a long period of time:
► Exit po wer saving mode if n ecessary via the mouse or keyboard or by switching on the
notebook.
► Close all
opened programs and co mpletely shut down th e notebook.
36 Fujitsu
To Next Page
Loading...
Need help?
General