35
- LIFEBOOK Application Panel
When the system is on, pressing the Support button invokes the Fujitsu Support Center utility which offers
three tabs: Manual, Diagnostic Program, and Support.
Manual tab
The Manual tab lets you automatically go to the Fujitsu Support website to download the system User’s
Guide. (You must be connected to the Internet in order to use this function).
Diagnostic Program tab
The Diagnostic Program tab allows you to automatically reboot the system, then open the boot menu, from
which you can choose Diagnostic Program or Recovery and Utility (same as pressing the button when the
system is shut down). From the Diagnostic tab you can also view your System Information.
Support tab
The Support tab lets you automatically go to the Support Website. (You must be connected to the Internet
in order to access the Support website).
Launching Applications with the Quick Launch Button
Your notebook is pre-installed with software utilities that let you operate and configure your LIFEBOOK
Application Panel. These utilities are found in the Start menu, under Control Panel > Button. The utility
includes an [Application Registration...] button.
Configuring your LIFEBOOK Application Panel
When you start Windows, the LIFEBOOK Application Panel is automatically activated. As an application
launcher, the LIFEBOOK Application Panel is very flexible. To set up the Panel to best suit your needs,
we have provided the Application Panel Setup utility that quickly and easily helps you make the most of
this valuable feature.
To Next Page
Loading...
