Fujitsu LIFEBOOK E5410 - Notebook Power Operations; Powering Off the Notebook

17
Using Your LIFEBOOK
Power On
Power/Suspend/Resume Button
You can use the Power/Suspend/Resume
button to turn on your notebook. Once you have
connected an AC adapter to the notebook or
charged the battery, you can power on your
notebook.
When you turn on your notebook,
be sure you have a power source
connected to it. This means that at
least battery is installed and charged or
that the AC adapter is connected and
has power.
You can press the Power/Suspend/Resume
button to turn o󰀨 the notebook. After you have
finished working on the notebook, you can
either leave it in Standby (i.e. suspend) mode
or turn it o󰀨.
Do not carry the notebook around when
it is still powered on. Do not subject the
notebook to shocks and vibrations. Failure
to do so may damage the notebook.
When you power on your notebook, it will
perform a Power On Self Test (POST) to check
the internal parts and conguration for normal
functionality. If an error is found, your notebook
will emit an audio warning and/or show an error
message.
After satisfactory completion of the Power On
Self Test (POST), your notebook will load your
operating system.
Power O󰀨
Before turning off the power, check that the
storage drive Access indicator is off. If you
power o󰀨 the notebook when it is accessing the
storage drive, data may be lost or corrupted.
To power o󰀨 the notebook, always shut down
the notebook properly using the Windows
shutdown procedure.
Remember to close all files, exit all
applications and shut down the operating
system prior to turning o󰀨 the power using
the power button. If documents are opened
when the notebook is turned o󰀨, data may
be lost and this may result in storage drive
errors.
Remember to use the correct procedure to shut
down the notebook. The proper procedure is:
Windows 10
1. Click the Windows icon
2. Click the
Power
, and select
Shut down
from the list.