To Next Page
T
Thomas MorrisSep 2, 2025
How to correct the date and time on a Fujitsu lifebook e756 Laptop?
- PPeter RamosSep 2, 2025
You can set the date and time on your Fujitsu Laptop using the BIOS-Setup-Utility in the main menu.
How to correct the date and time on a Fujitsu lifebook e756 Laptop?
You can set the date and time on your Fujitsu Laptop using the BIOS-Setup-Utility in the main menu.
Why only numerals are written when typing on Fujitsu lifebook e756 Laptop?
If when certain characters are entered on the keyboard of your Fujitsu Laptop, only numerals are written, it indicates that the virtual numeric keypad is activated. Press the Num key to deactivate it.
Why is the LCD screen difficult to read on my Fujitsu lifebook e756?
If the LCD screen on your Fujitsu Laptop is difficult to read, it may be due to reflected glare. Try turning the notebook or adjusting the tilt of the LCD screen. Alternatively, increase the brightness of the screen.
What does 'Press to resume, to SETUP' mean on Fujitsu Laptop?
If your Fujitsu Laptop displays the message 'Press to resume, to SETUP', it indicates an error occurred during the self-test before starting the operating system. Press the F1 function key to start the operating system, or press the F2 key to access the BIOS Setup.
How to resolve Failure Fixed Disk error on Fujitsu Laptop?
If you encounter a 'Failure Fixed Disk n' error on your Fujitsu Laptop, it means the settings of the hard disk drive are incorrect. Start the BIOS Setup (Primary Master submenu) and select the correct settings.
What does 'nn Stuck key' mean on Fujitsu lifebook e756 Laptop?
If your Fujitsu Laptop displays 'nn Stuck key', make sure that no key is pressed.
What to do if Fujitsu lifebook e756 LCD screen remains blank?
If your Fujitsu Laptop screen remains blank, try pressing a key or touching the touchpad. If you have an external monitor or television connected, press the key combination to switch the screen output.
What to do if the notebook’s LCD screen remains blank on Fujitsu lifebook e756?
If the LCD screen of your Fujitsu Laptop remains blank, press a key or touch the touchpad to see if the monitor is switched off. If you have an external monitor or television set connected, press the key combination to switch the screen output.
What to do if external monitor is blank or the image is unstable on Fujitsu lifebook e756 Laptop?
If the external monitor is blank or the image is unstable on your Fujitsu Laptop, terminate the application program in Windows by pressing Alt + F4. Set the screen resolution as described in the documentation for your operating system. Select monitor 1 or 2 as described in the documentation for your operating system.
What to do if external monitor is blank on Fujitsu Laptop?
If your external monitor remains blank, first ensure it is switched on. If it is on, check if power saving mode has been activated by pressing any key. Adjust the monitor's brightness if it is set too low. Verify that the screen output is correctly set and the power and data cables are properly connected to both the notebook and the monitor. After checking the connections, switch on the external monitor and the notebook.
General| Graphics | Intel HD Graphics 520 |
|---|---|
| Processor | Intel Core i5-6200U |
| Display | 15.6-inch, 1920 x 1080 pixels |
| RAM | 8 GB DDR4 |
| Storage | 256 GB SSD |
| Operating System | Windows 7 Professional |
| Weight | 1.9 kg |
| Battery | 6-cell, 72 Wh |
| Ports | USB 3.0, VGA, Ethernet, SD card reader |
| Wireless | Wi-Fi 802.11ac, Bluetooth 4.0 |
Essential safety information for notebook operation and handling.
Steps to unpack and inspect the notebook for damage upon arrival.
Guidelines for choosing a suitable and safe place to set up the device.
Instructions on how to connect the AC adapter and power cable to the notebook.
Procedure for the initial power-on and system setup.
Information about the notebook's battery, including life and care.
How to optimize power usage for battery life.
Setting up passwords for BIOS access and system security.
Enabling and disabling the TPM hardware security module.
How to access and launch the BIOS Setup Utility.
Navigation and interaction within the BIOS Setup Utility interface.
General advice and contact information for resolving issues.
Steps to restore the system to its original state.
Interpretation and resolution of BIOS and system error messages.
Solutions for common wireless LAN connection problems.
Critical recovery steps for unbootable systems with Windows 7.
Steps to create a bootable recovery drive for Windows 10.
Overview of available recovery methods for Windows 10.
