87
- Device Ports
e-SATA Port
DisplayPort
The DisplayPort connector, located on the rear of the system, allows you to connect DisplayPort devices
to your notebook. In order to connect a DisplayPort device, follow these easy steps:
1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.
Port Replicator Connector
The port replicator connector is used for the connection of your notebook to an optional port replicator.
In order to connect your notebook to this device, follow the instructions that came with your port repli-
cator.
E-SATA (External Serial Advanced Technology
Attachment) is an external version of SATA, which
connects your computer to the hard drive. E-SATA is
ideal for backing up large files on an external hard
drive.
To connect an E-SATA device:
1 Align the connector with the port opening.
2 Push the connector into the port until it is seated.
Figure 27. Connecting an e-SATA Device
To Next Page
Loading...
