Fujitsu Lifebook E8410 - Operating Your Lifebook Security;Application Panel

41 - LifeBook Security/Application Panel
Setting User Password
Windows XP:
1 Go to the Start menu.
2 Click on Programs.
3 Click on Security Panel Application and Set User Password.
4 Follow the on-screen instructions to set the user password
Windows Vista:
1 Go to the Start menu.
2 Select All Programs.
3 Select Security Panel Application and Set User Password.
4 Follow instructions to set the user password.
Operating Your LifeBook Security/Application Panel
The security lock feature is in effect both when the system resumes from Off or suspend state. You will
need to enter the user password right after pressing the Suspend/Resume button. Your system will not
boot or resume from Standby without entering your supervisor/user password.
From Off State
1 Turn on your system.
2 When the Security Indicator flashes, enter the password and press [Enter] button. For example, if the password
is 22222, press button number [2] five times and press [Enter] button.
3 The notebook will boot to normal operation.
YOU MAY CHANGE OR REMOVE THE SUPERVISOR OR USER PASSWORD BY REPEATING THE STEPS
DEFINED ABOVE.